Stain and Seal

A translucent water based all in one stain and topcoat for use on raw timber. Available in six beautiful colours. 200ml pot.

This product is currently out of stock and unavailable.

GUARANTEED SAFE CHECKOUT
  • Visa Card
  • MasterCard
  • American Express
  • Discover Card
  • PayPal

Description

Artisan Stain&Seal is a one step stain and sealer. It is water-based and water-resistant and can be used to stain and seal raw timber, refresh precoated timber or even as a glaze over painted finishes. VOC free and virtually odourless, Stain&Seal can be applied with a damp sponge, brush or short nap roller. Depth of colour can be increased with additional layers. Different effects can be achieved by layering different shades of Stain&Seal.
How to use: we recommend sanding and cleaning with Artisan Easy Scrub to ensure that the surface is clean and free from dirt, wax, oil, or flaking paint. Apply Stain&Seal with a sponge, working well into the grain and then finishing in long strokes with the grain. Surface may be lightly misted with water to ensure smooth coverage. Normal drying time is 20-30 minutes, and the surface can be recoated after 2-hours. Sand with 400+ grit sandpaper between coats for a silky smooth finish. Leave to cure for seven days for best results.
To use as a glaze: apply to carved detail, pushing well into detail and wipe away excess using a damp cloth.
Coverage:  Approximately 6–10 square metres per litre, depending on application technique and surface roughness

Additional information

Colour

Driftwood, Fruitwood, Limewash, Onyx, Provincial, Walnut

Reviews

There are no reviews yet.

Be the first to review “Stain and Seal”

Your email address will not be published. Required fields are marked *